 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MITSUBISHI IGBT MODULES CM300E3U-12H HIGH POWER SWITCHING USE INSULATED TYPE TC Measured Point A D F S (4 - Mounting Holes) H B E T CM 3 - M6 Nuts Q Q P N G K K K R M C L Description: Mitsubishi IGBT Modules are designed for use in switching applications. Each module consists of one IGBT having a reverse-connected super-fast recovery free-wheel diode and an anode-collector connected super-fast recovery freewheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. Features: Low Drive Power Low VCE(sat) Discrete Super-Fast Recovery Free-Wheel Diode High Frequency Operation Isolated Baseplate for Easy Heat Sinking Application: Brake E2 G2 C2E1 E2 C1 Outline Drawing and Circuit Diagram Dimensions A B C D E F G H K Inches 4.25 2.44 Millimeters 108.0 62.0 Dimensions K L M N P Q R S T Inches 0.71 0.87 0.33 0.10 0.85 0.98 0.11 0.25 Dia. 0.6 Millimeters 18.0 22.0 8.5 2.5 21.5 25.0 2.8 6.5 Dia. 15.15 Type CM 1.14 +0.04/-0.02 29 +1.0/-0.5 3.660.01 1.880.01 0.87 0.16 0.24 0.71 93.00.25 48.00.25 22.0 4.0 6.0 18.0 Ordering Information: Example: Select the complete module number you desire from the table - i.e. CM300E3U-12H is a 600V (VCES), 300 Ampere IGBT Module. Current Rating Amperes 300 VCES Volts (x 50) 12 Sep.1998 MITSUBISHI IGBT MODULES CM300E3U-12H HIGH POWER SWITCHING USE INSULATED TYPE Absolute Maximum Ratings, Tj = 25 C unless otherwise specified Ratings Junction Temperature Storage Temperature Collector-Emitter Voltage (G-E SHORT) Gate-Emitter Voltage (C-E SHORT) Collector Current (Tc = 25C) Peak Collector Current (Tj 150C) Emitter Current** (Tc = 25C) Peak Emitter Current** Maximum Collector Dissipation (Tc = 25C, Tj 150C) Mounting Torque, M6 Main Terminal Mounting Torque, M6 Mounting Weight Isolation Voltage (Main Terminal to Baseplate, AC 1 min.) Symbol Tj Tstg VCES VGES IC ICM IE IEM Pc - - - Viso CM300E3U-12H -40 to 150 -40 to 125 600 20 300 600* 300 600* 890 3.5~4.5 3.5~4.5 400 2500 Units C C Volts Volts Amperes Amperes Amperes Amperes Watts N*m N*m Grams Vrms * Pulse width and repetition rate should be such that the device junction temperature (Tj) does not exceed Tj(max) rating. **Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). Static Electrical Characteristics, Tj = 25 C unless otherwise specified Characteristics Collector-Cutoff Current Gate Leakage Voltage Gate-Emitter Threshold Voltage Collector-Emitter Saturation Voltage Symbol ICES IGES VGE(th) VCE(sat) QG VEC VFM Test Conditions VCE = VCES, VGE = 0V VGE = VGES, VCE = 0V IC = 30mA, VCE = 10V IC = 300A, VGE = 15V, Tj = 25C IC = 300A, VGE = 15V, Tj = 125C Total Gate Charge Emitter-Collector Voltage** Emitter-Collector Voltage VCC = 300V, IC = 300A, VGE = 15V IE = 300A, VGE = 0V IF = 300A, Clamp Diode Part Min. - - 4.5 - - - - - Typ. - - 6 2.4 2.6 600 - - Max. 1 0.5 7.5 3.0 - - 2.6 2.6 Units mA A Volts Volts Volts nC Volts Volts * Pulse width and repetition rate should be such that the device junction temperature (Tj) does not exceed Tj(max) rating. Dynamic Electrical Characteristics, Tj = 25 C unless otherwise specified Characteristics Input Capacitance Output Capacitance Reverse Transfer Capacitance Resistive Load Switch Times Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Symbol Cies Coes Cres td(on) tr td(off) tf trr Qrr trr Qrr VCC = 300V, IC = 300A, VGE1 = VGE2 = 15V, RG = 2.1, Resistive Load Switching Operation IE = 300A, diE/dt = -600A/s IE = 300A, diE/dt = -600A/s IF = 300A, Clamp Diode Part diF/dt = -600A/s VCE = 10V, VGE = 0V Test Conditions Min. - - - - - - - - - - - Typ. - - - - - - - - 0.72 - 0.72 Max. 26.4 14.4 4 250 600 350 300 160 - 160 - Units nF nF nF ns ns ns ns ns C ns C Diode Reverse Recovery Time** Diode Reverse Recovery Charge** Diode Reverse Recovery Time Diode Reverse Recovery Charge **Represents characteristics of the anti-parallel, emitter-to-collector free-wheel diode (FWDi). Sep.1998 MITSUBISHI IGBT MODULES CM300E3U-12H HIGH POWER SWITCHING USE INSULATED TYPE Thermal and Mechanical Characteristics, Tj = 25 C unless otherwise specified Characteristics Thermal Resistance, Junction to Case Thermal Resistance, Junction to Case Thermal Resistance, Junction to Case Contact Thermal Resistance Symbol Rth(j-c)Q Rth(j-c)D Rth(j-c) Rth(c-f) Test Conditions Per IGBT Per FWDi Clamp Diode Part Per Module, Thermal Grease Applied Min. - - - - Typ. - - - 0.020 Max. 0.14 0.24 0.24 - Units C/W C/W C/W C/W OUTPUT CHARACTERISTICS (TYPICAL) TRANSFER CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) 600 COLLECTOR CURRENT, IC, (AMPERES) 500 400 300 200 100 0 VGE = 20V 15 500 400 300 200 100 0 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) Tj = 25oC 14 600 COLLECTOR CURRENT, IC, (AMPERES) 5 VCE = 10V Tj = 25C Tj = 125C VGE = 15V Tj = 25C Tj = 125C 13 4 3 2 1 12 11 10 9 8 0 0 4 8 12 16 20 0 100 200 300 400 500 600 GATE-EMITTER VOLTAGE, VGE, (VOLTS) COLLECTOR-CURRENT, IC, (AMPERES) 0 2 4 6 8 10 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL) CAPACITANCE VS. VCE (TYPICAL) 10 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) 103 Tj = 25C 102 Tj = 25C CAPACITANCE, Cies, Coes, Cres, (nF) VGE = 0V 8 6 4 2 IC = 600A EMITTER CURRENT, IE, (AMPERES) Cies 101 IC = 300A 102 Coes 100 Cres IC = 120A 0 0 4 8 12 16 20 GATE-EMITTER VOLTAGE, VGE, (VOLTS) 101 0.6 1.0 1.4 1.8 2.2 2.6 3.0 10-1 10-1 100 101 102 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) Sep.1998 MITSUBISHI IGBT MODULES CM300E3U-12H HIGH POWER SWITCHING USE INSULATED TYPE HALF-BRIDGE SWITCHING CHARACTERISTICS (TYPICAL) REVERSE RECOVERY CHARACTERISTICS (TYPICAL) di/dt = -600A/sec Tj = 25C REVERSE RECOVERY CURRENT, Irr, (AMPERES) GATE CHARGE, VGE 103 tf SWITCHING TIME, (ns) REVERSE RECOVERY TIME, trr, (ns) 103 102 20 GATE-EMITTER VOLTAGE, VGE, (VOLTS) IC = 300A 15 VCC = 200V VCC = 300V td(off) td(on) Irr 102 tr VCC = 300V VGE = 15V RG = 2.1 Tj = 125C 102 trr 101 10 5 101 101 102 COLLECTOR CURRENT, IC, (AMPERES) 103 101 101 102 EMITTER CURRENT, IE, (AMPERES) 100 103 0 0 200 400 600 800 GATE CHARGE, QG, (nC) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c) Zth = Rth * (NORMALIZED VALUE) 10-3 101 10-2 10-1 100 101 NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c) Zth = Rth * (NORMALIZED VALUE) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi) 10-3 101 10-2 10-1 100 101 100 Single Pulse TC = 25C Per Unit Base = Rth(j-c) = 0.14C/W 100 Single Pulse TC = 25C Per Unit Base = Rth(j-c) = 0.24C/W 10-1 10-1 10-1 10-1 10-2 10-2 10-2 10-2 10-3 10-5 TIME, (s) 10-4 10-3 10-3 10-3 10-5 TIME, (s) 10-4 10-3 10-3 Sep.1998 |
Price & Availability of CM300E3U-12H
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |